Wooden Rattle DIY Ring - Bead - #120005

Sustainable unfinished large natural wooden ring to customize and make your own wooden baby rattle. The flat bead comes off and lets you add smaller wooden rings or silicone rings to add color and sound to the rattle. 

During the process of making the wooden ring, no chemicals or any artificial additives, solvents or dyes are used. The ring is hand sandpaper polished repeatedly to make them smooth.

• quantity: 1 unfinished ring with bead
• ring size (including the bead): 98mm / 3.85 inch
• ring size (without the ring): 95mm / 3.74 inch
• ring thickness: 14mm / 0.55 inch
• flat bead thickness: 27mm / 1.06 inch
• wood: light european wood without finish
✔ Sustainable European Wood
✔ MADE IN EUROPE
✔ Handmade wood turned and polished

Instructions:
Push out each side of the ring near the top bead and push the bead to release it (you will need to make good pressure to release it but not too much so the ring doesn't break). Decorate as you wish.
To put the bead in place do the same and slide the bead in. The bead holds super tightly in place once it's correctly inserted, it will be impossible to move without the correct and strong movement to open it. You can add a little wood glue (like Gorilla glue) to hold the bead in place to make them permanently fixed. 
 

Note: 
This listing is for the wooden ring with the bead shown in the photos, other wooden rings, and decor accessories are not included.