Wooden Rattle DIY Ring - Pin - #120006

Sustainable unfinished large natural wooden ring to customize and make your own wooden baby rattle. The center screws off and lets you add smaller wooden rings, beads, or silicone rings to add color and sound to the rattle. 

During the process of making the wooden ring, no chemicals or any artificial additives, solvents or dyes are used. The ring is hand sandpaper polished repeatedly to make them smooth.

• quantity: 1 unfinished ring with bead
• ring size (including the bead): 110.7mm / 4.36 inch
• ring size (without the ring): 94.5mm / 3.72 inch
• ring thickness: 14mm / 0.55 inch
• bead size: 23mm / 0.90 inch
• wood: light european wood without finish
✔ Sustainable European Wood
✔ MADE IN EUROPE
✔ Handmade wood turned and polished

Instructions:
Screw or push the top bead part until it's released from the ring bottom part and add the decorations as you wish. Push back in place. Add a little wood glue (like Gorilla glue) to hold the bead in place to make them permanently fixed. 

Note: 
This listing is for the wooden ring with the bead shown in the photos, other wooden rings, and decor accessories are not included.